Short answer
Buried drainage is roughly 4,500 years old. Cities in the Indus Valley were running brick sewers with inspection holes before Rome existed. Rome’s Cloaca Maxima began around 600 BC as an open drainage channel and was only covered over centuries later. The modern sewer arrived in 1858, when London built 82 miles of main sewers out of 318 million bricks after a hot summer made the Thames unbearable. The materials changed faster than the idea did: vitrified clay, then cast iron, then a wood pulp pipe called Orangeburg, then PVC. The lining method Contour uses in Duluth today was invented in 1971, in a Victorian sewer in East London.
There is a pipe under your yard doing a job that has not changed in four and a half thousand years. Move waste away from where people live, using gravity, through something that does not leak. Every generation has had a go at it with the best material available, and every one of those attempts is still in the ground somewhere.
In Duluth and Superior that is not a figure of speech. Run a camera down a sewer line here and you can hit clay laid before the First World War, cast iron from the 1950s, and PVC from last decade, in the same run, under the same house.
So it is worth knowing how we got here.
Before Rome, there was brick
The oldest sophisticated drainage we know about belongs to the Indus Valley civilisation, dated to roughly 2600 to 1900 BC, in cities like Mohenjo-daro and Dholavira in what is now Pakistan and India.
These were not ditches. Sewage ran through underground drains built from carefully laid brick. The drains had cleaning and inspection holes at intervals, which is the same reasoning behind the cleanout on the side of your house. Waste water from upper floors came down through terracotta pipes into street channels.
Somebody worked out, four and a half thousand years ago, that a buried pipe you cannot open is a buried pipe you cannot maintain. We have not improved on that insight. We have only improved the camera.
Around the same era, the Minoan palace at Knossos on Crete was collecting roof rainwater to flush sewage from bathrooms, through underground sewers with manholes big enough for a person to climb into.
Rome, and a sewer that was not built to be a sewer
The Cloaca Maxima is the famous one, and most of what people confidently say about it is shakier than it sounds.
Roman tradition credits it to Tarquinius Priscus, a king whose reign is usually placed around 616 to 578 BC, which is where the familiar “600 BC” comes from. That date is tradition rather than archaeology. What the archaeology supports is that the oldest walls date to the 6th century BC, and that the covering over the top came much later, with the oldest domes dating to the beginning of the 2nd century BC.
More interesting is what it was for. Livy describes the work as draining the marshy, flood-prone valley between the Capitoline, Esquiline and Palatine hills, the ground that became the Roman Forum. A number of scholars think it started life as an open canal. It was a land reclamation project that grew into a sewer, not a sanitation scheme that happened to drain a valley.
That is a familiar shape. Infrastructure usually gets built for one reason and then quietly takes on the job everybody needed doing all along.
The Romans also ran pressurised water through lead pipes, which they called fistulae. They were not entirely unaware of the problem, either. Vitruvius, writing in the first century BC, recorded that lead workers had an unhealthy pallor and argued that water carried in clay was better for health than water carried in lead. It took the rest of the world about two thousand years to act on that, and Duluth is still replacing lead service lines today under a federally funded program.
Then very little happened for a very long time
Roman engineering knowledge did not spread evenly and did not survive everywhere it had reached. For a long stretch, waste management in much of Europe meant the street, the river, or a pit in the ground, and cities grew faster than any of those could cope with.
What finally changed things was not a technical breakthrough. It was a smell.
The summer that forced London to act
London had been emptying its sewers straight into the Thames. In July and August 1858, hot weather and a low river left the result baking on the banks in the middle of the city. It became known as the Great Stink, and the Houses of Parliament sat directly on the worst of it.
Parliament moved at a speed that would be remarkable today. The enabling bill was tabled on 15 June and passed into law on 2 August 1858, about seven weeks, with borrowing powers of three million pounds. Nothing concentrates a legislature like a bad smell in its own building.
Joseph Bazalgette built the result, and the numbers are still startling:
- 1,100 miles of street sewers feeding into 82 miles of main intercepting sewers
- 318 million bricks
- Construction from 1859 to 1875, officially opened in 1865
- Deliberately oversized, far larger than the London of the day required
Bazalgette’s decision to build bigger than necessary is the reason those Victorian brick tunnels are still carrying sewage for a city of nine million people. He is credited with ending London’s cholera outbreaks, and with saving more lives than any other Victorian official.
That is the moment the modern sewer system was invented: intercept the waste, carry it somewhere else, and build it for the city you are going to have rather than the one you have.
Chicago lifted itself out of the mud
America’s version of this story happened on the Great Lakes, which makes it closer to home than it first appears.
In 1855 Chicago hired Ellis Chesbrough, and he designed what is generally described as the first comprehensively planned sewer system in the United States. He hit an immediate problem. The streets sat too low for the new sewers to drain properly.
The solution was to raise the city. Downtown Chicago was lifted roughly ten feet, with buildings jacked up on screws while people carried on using them, and new foundations built underneath. Business owners complained and went to law over the cost, which is the most predictable detail in the whole story.
Chesbrough also drove a water intake tunnel about two miles out into Lake Michigan, to reach past the water the city had already fouled.
And then the flaw showed up. The sewers drained into the river, and the river carried the waste toward the lake the city drank from. Chicago eventually reversed the river to deal with it, finished after Chesbrough’s death.
Anyone in the Twin Ports will recognise the shape of that problem. Protecting a Great Lake from the city sitting on its shore is the same job the Western Lake Superior Sanitary District does here, and it is the reason Duluth runs an inflow and infiltration program that pays homeowners to keep clean water out of the sanitary sewer.
The century when the material kept changing
With the municipal problem broadly solved, the interesting question moved to the pipe itself. The American answer changed roughly every generation.
Vitrified clay was the standard for most of the twentieth century, laid in three to four foot sections joined at bell and spigot joints. It is close to chemically indestructible. Its weakness was never the material, it was the joints, which is where roots get in.
Cast iron ran alongside it, particularly nearer the house. Enormously strong, with a lifespan measured in the better part of a century, but it corrodes from the inside out and narrows as deposits build up on the wall.
Orangeburg is the strange one. It is bituminized fibre pipe, made of wood pulp layers bonded with pitch, and it is named after Orangeburg, New York, where most of it was produced. The Fiber Conduit Company was founded there in 1893 and renamed itself the Orangeburg Manufacturing Company in 1948.
It began life as electrical conduit. It ended up carrying sewage because it was cheap, light, and easy to cut during the post-war building boom, exactly when America was throwing up housing at speed. Plumbing codes permitted it for decades. Then PVC arrived and the advantage vanished overnight. The company was gone by 1974.
Orangeburg is the only sewer material in common use that was essentially designed to disappoint. It softens, deforms, goes oval and eventually collapses. We find it under Duluth and Superior homes regularly, and it is the main reason a camera inspection on a house built between the mid 1940s and the mid 1970s is worth doing before anything goes wrong.
PVC took over from the 1980s and remains the standard. It does not corrode, roots struggle to find a way in, and the joints are solvent welded rather than relying on gravity and mortar.
Hackney, 1971, and the method we run today
The last chapter is more recent than most people expect, and it is the one that matters most to a homeowner now.
Until the 1970s, a failed sewer meant a trench. Find it, dig it up, replace it, put the yard back. Every advance since the Romans had been about the pipe, not about how you reach it.
In 1970 an engineer named Eric Wood filed a patent, granted in 1971, for a process that turned the problem inside out. Rather than removing the old pipe, you line it: a resin-saturated tube is inverted into the existing pipe, pressed against the wall and cured hard in place, forming a new jointless pipe inside the old one.
The first installation was carried out that year on about 230 feet of an egg-shaped sewer in East London. A Victorian brick sewer, of exactly the kind Bazalgette’s generation built, was the first thing ever relined.
That process is cured-in-place pipe, and it is what we do in Duluth most weeks of the year. The resin and the curing have moved on a long way since 1971, and we cure with blue light rather than steam or hot water, which is why we can line in February. The underlying idea is Wood’s, and it is barely fifty years old.
What is under your house
The practical version of all this history is short. The age of your home tells you roughly what you are standing on.
Built before 1950, it is probably clay, possibly with cast iron near the foundation. Built between about 1945 and 1975, Orangeburg is a real possibility and worth ruling out. Built after the 1980s, almost certainly PVC. Plenty of houses have two or three of these in the same run, because lines get repaired in sections and whoever did the work used whatever was current.
None of that is visible from the surface, which is the one thing that has not changed since Mohenjo-daro. The only way to know what is down there is to look.
We cover the materials in detail, and what each one means for your repair options, in our guide to what is buried under Northland homes.
Common questions
Who invented the sewer?
Nobody, in the sense of one inventor. Buried brick drainage with inspection access existed in the Indus Valley around 2600 to 1900 BC. The modern intercepting sewer system, where waste is carried away from the city rather than dumped in the nearest river, dates from Joseph Bazalgette’s London scheme after 1858.
How old is the Cloaca Maxima?
Roman tradition dates its beginning to around 600 BC under Tarquinius Priscus. The oldest surviving walls date to the 6th century BC, and the vaulting that covered it over dates from the beginning of the 2nd century BC. It likely began as an open channel to drain the valley that became the Roman Forum, rather than as a sewer.
Are Victorian sewers still in use?
Yes. Bazalgette’s brick tunnels still form part of London’s working sewer system more than 150 years after they were built, largely because he deliberately sized them for a far bigger city than existed at the time.
How old is sewer pipe lining?
The cured-in-place pipe patent was filed in 1970 and granted in 1971, and the first installation was done the same year on an egg-shaped sewer in East London. It is a much newer technology than most homeowners assume.
How old is the sewer line under my Duluth home?
Usually about as old as the house, unless it has been replaced. A free camera inspection will tell you the material, the condition and whether it has been repaired before. In older Duluth homes it will also tell you whether there is a house trap in the way, which was standard practice before the 1960s and stops a camera cold.
If you want to know what era you are standing on, get in touch and we will come and look. The inspection is free, you watch the screen with us, and you keep the footage.